Seafari Mini 550 GPD (Modular)

-Extremely quiet, smooth, and with complete vibration isolation.
-Exclusive Solid Salinity Meter, an essential tool for product water monitoring.
-Space efficient, one of the smallest compact watermakers available.
-Modular configuration allows flexible installation options
-A failsafe Product Water Diversion Valve allows only safe drinking water to enter storage tanks.
-High rejection, high yield, commercial grade, and chemical resistant Membranes.
-Clear viewable Sea Strainer with a cleanable Monel Mesh Screen filter for ultimate corrosion resistance and large particulate removal.
-Exclusive high efficiency Booster Pump
-Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional).
-Stainless Steel, liquid filled exterior and interior Pressure Gauges for accurate measurement of system functions and corrosion resistance.
-Flow Meter for visual monitoring of the product water flow
-All High Pressure Connections are composite 316L Stainless Steel for maximum corrosion and rust resistance.
-Water Quality Indication LED

Specifications – Seafari Mini 550 GPD (Modular)

Product Water Produced / Hour: +-15% 850 psi / 56 Bar, 77 F / 25 C & 35,000 ppm TDS typical sea water
Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
Product Water Temperature: Ambient to feed water temperature
Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
Temperature Range: Min. 33 degrees F / .5 degrees C Max. 122 degrees F / 50 degrees C
System Feed Water Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 – 4.2 gpm / 11.4 – 15.9 lpm
Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
Chlorine Tolerance: 0.1 ppm
pH Range: 3-11 (typical seawater pH is 8)
Dimensions (L x W x H)
Weight: 125 lbs / 57 kg.

System Pressure

Feed Water Minimum: 6 psi / .41 bar / .42 Kg/cm2
Feed Water Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2

System Operation

Seawater @ 35,000 ppm & 77° F / 25° C
Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm)
Feed Inlet: 3/4″ MNPT (Male National Pipe Thread, Amer. Std)
Brine Discharge: 1/2″ FNPT (Male National Pipe Thread, Amer. Std)
Product: 3/8″ FNPT (Female National Pipe Thread, Amer. Std)

Mini 550 GPD Modular

Pump: HP / Booster
Phase: Single / Single
Hz 50/60 // 50/60
Voltage: 110/220 // 115/230 // 110/220
HP: 1.75//2.1 // 0.5
Running Amps: 18.9/9.4 // 18.2/9.1 // 9.4/4.7-7.4/3.7
Start Up Amps: 57/28 // 28/14